Parts

Lanceman breakdown of parts we can add to your build. We work with many different brands so you get what you want

Parts support

The main parts groups customers ask for most.

Clear split between water-fed window-cleaning poles and pressure-washer poles
Lances and nozzles shown with the size bands customers usually ask about
High-pressure and low-pressure fittings kept separate for easier enquiries

18 ft to 60 ft Hybrid and carbon options

A dedicated section for water-fed window-cleaning poles so customers can see the main working lengths before getting in touch for the exact setup.

Available sizes

18 ft, 22 ft, 25 ft, 30 ft, 35 ft, 40 ft, 47 ft, and 60 ft options.

Common options

Clamps, goosenecks, brush heads, hose kits, and lightweight or higher-reach pole builds.

Best for

Domestic rounds, commercial glass, higher-reach work, and customers who need a clear progression from everyday poles to taller access lengths.

5 ft to 24 ft Fixed and telescopic options

Pressure-washer poles split away from window-cleaning poles so the page makes it obvious these are built for very different working pressures and applications.

Available sizes

5 ft, 8 ft, 12 ft, 18 ft, and telescopic options up to around 24 ft.

Common options

Trigger guns, belt-drive hose support, quick-release pole ends, and angled lance attachments.

Best for

Cladding, facades, roofline work, higher-reach exterior cleaning, and operators who need safer distance from the surface.

18 in to 48 in Single, double, and angled styles

A clear lance category so customers can compare straight, longer, shorter, and specialist lance formats without getting lost in nozzle or fitting detail first.

Available sizes

18 in, 24 in, 36 in, and 48 in lances, plus double lance and angled lance styles.

Common options

Insulated grips, quick-release ends, variable-pressure double lances, and chemical or foam-ready setups.

Best for

Day-to-day trigger-gun setups, operators fine-tuning reach and control, and machines where the right lance length changes working comfort.

Jet sizes 025 to 060 0 degree to fan spray patterns

Nozzles are grouped here by jet size and spray pattern so customers can quickly narrow down the right option for their machine flow and pressure.

Available sizes

Typical jet sizes such as 025, 030, 035, 040, 045, 050, and 060.

Common options

0 degree, 15 degree, 25 degree, 40 degree, and detergent or soap nozzles depending on machine setup.

Best for

Replacing worn jets, matching flow correctly, changing spray angle, and dialing in the right cleaning finish for different surfaces.

1/4 in, 3/8 in, and M22 Brass and stainless options

High-pressure fittings are separated out clearly for customers who need the right connection type for guns, reels, hoses, pumps, and lances.

Available sizes

1/4 in and 3/8 in quick release fittings, M22 couplings, and common BSP connection sizes.

Common options

Male and female couplers, screw fittings, swivel fittings, adaptors, and hose-to-reel connection pieces.

Best for

Pressure washer hose builds, pump connections, trigger gun changes, reel upgrades, and adapting one machine format to another.

1/4 in to 1/2 in hose sizes Barbed, push-fit, and threaded options

Low-pressure fittings are given their own section for chemical lines, transfer hoses, and water-feed connections that sit outside the high-pressure side of the machine.

Available sizes

Common low-pressure hose-tail and line sizes from 1/4 in up to 1/2 in depending on the system.

Common options

Hosetails, barbed fittings, inline connectors, threaded adaptors, and water or chemical transfer couplings.

Best for

Chemical feed lines, pure-water delivery lines, tank connections, and lower-pressure support plumbing around the machine setup.

Parts

The main parts groups customers ask for most.

Window cleaning poles

Pressure washer poles

Lances

Nozzles

High pressure fittings

Low pressure fittings